I’m repairing a cuckoo clock that has a commonly-seen problem: one of the screws mounting the movement to the case has stripped its hole. Normally, I’d try filling the hole with a wood filler, but this time I tried something different: “Bushing” the hole with a plug of new wood.Continue reading Repairing a Clock Case’s Stripped Wood Screw Hole
While repairing the latest musical cuckoo clock I discovered a problem in the musical movement: a cracked plastic gear. I was at a loss as to how this could be fixed, but once again found the solution from expert posts on the message boards at the NAWCC (National Association of Watch and Clock Collectors) . The whole story follows…Continue reading Repairing a Cracked Plastic Clock Gear
The family cuckoo clock I’m working on is being whimsical about when it decides to play the music, so I’ve built a test stand that will let me see what’s going wrong.Continue reading Building a Cuckoo Clock Test Stand
Once I had the eBay cuckoo clock cleaned, adjusted, repaired, and running, I put the hands on. To my surprise, the minute hand kept slipping, no matter how I tightened the hand nut that’s supposed to hold it in place. The solution to this mystery lay in a troubleshooting video from a cuckoo clock seller in the Black Forest.Continue reading Problems Adjusting the Cuckoo Clock Minute Hand
A while ago I bought a beat up cuckoo clock on eBay, to practice cuckoo clock cleaning and repair. Its face was missing most of its numerals. In this post, I describe how to use a 3D printed template to glue the numerals on a cuckoo clock’s face.Continue reading Replacing the Numbers on a Cuckoo Clock Dial
An older clock has usually spent years in the company of a smoker or near a smokey fireplace, accumulating layers of tar, ash, and who knows what else. A simple dusting or cleaning with a wood polish won’t necessarily remove these layers of smoke, so when it’s time to clean a vintage clock, it doesn’t hurt to clean the case as well.Continue reading Cleaning the Cuckoo Clock Case and Figures
I’m in the process of cleaning and repairing a family musical cuckoo clock. I’ve watched a lot of videos on repairing cuckoo clocks, and have disassembled, cleaned, and repaired one cuckoo movement, so I think I’m as prepared as I can be for working on the clock movement.
The musical movement is another matter. What follows is a detailed How To that captures what I learned, what to do, and what not to do.Continue reading Cleaning and Adjusting a Cuckoo clock’s Musical Movement